Page Comparison

From the previous parts, we have a component set up with 5 years of log data. In order to try this out, we will need another component.

• From Iguana X’s dashboard, click + Component

• In the Add Components dialog that pops up, select Custom, which should be the first option

  • It is recommended to change the name of the component. This guide proceeds assuming you renamed it Destination

• Then click Add in the bottom right of the dialog

• You should see a new component appear on the dashboard

Image Removed

Now we will need to link the two components together so that messages can be pushed from one component to another . Assuming Source is the component with the logs and Destination is the component created above, do this by:

• From Iguana X’s dashboard, click Edit Connections

• First click Source, then click Destination

• A link should appear connecting the two, with the arrow on the link pointing from Source to Destination

• Click on Edit Connections again to exit this mode

Image Removed

Now that the components are linked, we can reposition the queue.

From Iguana X’s dashboard, double click on Destination to bring up the component card

In the Queue Position row click reposition

Image Removed

Change the date to go back 5 years:

Image Removed

Then close the dialog and pay attention to fact that there should be a large number of days of logs.

Going to the Logs tab and selecting Destination as the component, you should see a log message showing that a new queue position was accepted

Image Removed

Going back to the dashboard and running the Destination component by toggling the switch, the component will begin to process messages from its queue and the QUE value will start to decrease

Image Removed

Good luck - we’re interested to see if you can figure this out from the user interface!